覆膜胶合板

Conserve and Maintain:
●Storge●
Always clean and repair the formwork panels before storage,The formwork should then be stacked off the groud on level supports and under cover,Framed formwork panels should be stacked off the groud on level supports and under cover.Framed formwork panels should be stacked alternately face and back to back to avoid face damages by bolts etc,If panels are wet,do not allow them to dry too rapidly.

●Sealing of edges●
Phenolic fabric film faced plywood edges are fully sealed in the factory and it is the most important than all edges remain sealed.To obtain full value from a phenolic fabric film faced sheet,any recut edges should be sealed as soon as possible with waterproof paint.

●Sealing of holes●

Any holes made in fabric film faced formwork panels should also be sealed to prevent water entering,If water does enter,it may cause swelling around the holes.

●Cleaning and Repair●
To obtain full life,cleaning should be carried out immediately after each use,Phenotic fabric film faced plywood may be wiped with release agent or cleaned with water and stiff brush,It may be necessary to use a hardwood scraper but care should be taken not to damage the plywood face,Do not use a wire brush or sharp metal scraper to dislodge hardened concrete.