Big Induced Draught Centrifugal Fan

Usage 

BF - 16 boiler fan is to burn a variety of coal and with a smoke and dust removal device 1 ton / h - 20 tons / h supporting the design of industrial boilers, where the intake conditions are comparable, similar performance can be used , But the maximum temperature shall not exceed 250 ºC, in the induced draft fan must be installed before the dust removal efficiency of not less than 85% of the dust removal device to reduce the smoke into the fan dust content, improve fan life.

Ventilator conveyor medium is the air, the maximum temperature shall not exceed 80 ºC; induced draft fan for the media is flue gas, the maximum temperature shall not exceed
250 ºC.

Dust removal device must be installed in the front of fan to minimize the amount of dust into the fan. According to the usage of general power plants, the efficiency of equipped dust collector shall not be less than 85% .

Notes:
When you want to use this series of boiler fan to transport the gas that is flammable, explosive, corrosive or temperature over 80 ºC, we are designed and manufactured for you before your order.

Performance Curve&Parameter
Machine NO.

Induced draft mechanism into a single inhalation, machine number has 8: 3.15C,4C,5C,6C,8C,9C,12D,12.4D

As this series boiler fan have many different machine No and parameters, so if the following spes can't meet your demand, please contact our sales manager to get introduction book or catalog. Thanks for your patience!

XH - BF - 16 №3.15C,4C,5C, 6C,8C,9C,12D,12.4D Performance Sheet

For more differeent machine No and specification, please check other XH - CF - 16 series. Please be forgiven if there is any inconveniences occurred.

Ordering instructions
When ordering, please specify the fan number, speed, air volume, wind pressure, outlet angle and direction of rotation, as well as motor model, power, speed and so on.
The most important factors are volume and pressure.

To make the proper fan selection, you must consider the following system conditions the fan will be subjected to:

1. What is the required airflow?
This is rated in cubic feet of air per minute (CFM) or, in metric equivalent, it is rated in cubic meters of air per hour (M³/Hr).

2. What is the static pressure through the complete system?
This is rated in static pressure water gauge (SP) or, in metric equivalent, it is rated in Pascal's (Pa).

3. What is the ambient air temperature outside the fan?

4. What will be the airflow conditions through the fan?

A. Clean or dirty (contaminated) air?

B. Dry or wet (moisture laden) air?

C. Temperature of air?

5. What is the altitude the fan will be operating in?

6. Will the air stream, inside the fan, contain anything that could be explosive or flammable?

7. Will the general location the fan will be operating in contain any type of explosive or flammable material or liquid?

Customized
When the exiting machine number, rotation, the wind angle and transmission mode can not meet the needs of users, we can design according to the fan similar theory and the user's specific parameters requirements.

Technical Support Service
Our engineers can design the right fan for your application at a competitive price and delivery.
When using our products, If any problems on installation, operation, maintainance. . and so on, please contact our sale manager directly or leave a message on our website, we will call you in the first time.
.

Detailed Performance Catalog
Contact our sales manager to get a list of available fan sizes and to view detailed performance curves for each fan Motexo builds.

Company & Brand

Motexo fans are built by Boxing Motexo Industries Co. , Ltd. In Shandong, China. XFC has served the mining and industrial field for 24 years.

The factory was founded in 1979 and covers an area of 100, 000 square meters. Products are widely used in boilers, workshops, mines, textiles, oil, fan boiler, chemical, kiln, metallurgy, building materials and other industries, Our main products are mine fan, axial fan, open cotton fan, material transmission fan.

Motexo Fans has a wide selection of fans available, from 0.25 horsepower to 1120 horsepower and from 0.98 inch diameter to 11 inch diameter(impeller diameter). Contact us to get a list of available fan sizes and to view detailed performance curves for each fan Motexo builds.

Motexo Fan manufacture 200 series and more than 1,200 kinds of industrial fans. All include heavy - duty designs for industrial applications. We manufacture axial fans, centrifugal fans, mine fans and miniature fans. All fans below 600mm(impeller size) are direct driven. All fans above 600mm are available in both direct driven or belt driven models. All models are available with cast aluminum, steel or stainless steel propellers. All models can also be manufactured in all aluminum or all stainless steel construction.

We understand the harsh environments in which fans are used. Motexo fans will meet and exceed the demands of your mine or tunnel project, other industrial factory.

www.motexofan.com

www.motexocn.com